Edge bandings

<< Click here to display whole document >>

Inventory >

Edge bandings

To work with Edge bandings, select the menu item "File > Inventory > Edge bandings", or press Ctrl+5.


Edge bandings tab enables you to define edge bandings or it can be used for defining of post-processing of parts (e.g. grinding). Once you define edge bandings you can assign them to edges of plan parts. See also Defining edge banding.




Record number.


Unique identification number generated by program.


User defined identification number.


Short description.


Band thickness.


Each banded side of part will be decreased by this value, so part size corresponds to its final size (Rough length = Length - Decrement; Rough width = Width - Decrement). It is also possible to enter negative decrement. In this case it specify post-processing of part (grinding, etc.).


Length of material overhang, will be added to each banded edge length. Is included in total length calculated for given plan parts.


Band cost (e.g. "8.20 / L4", etc.).

L1 = cost of 1 length unit

L2 = cost of 10 length units

L3 = cost of 100 length units

L4 = cost of 1000 length units

L9 = cost of 12 length units

Note 1

Additional description.

Note 2

Additional description.


Determines whether band is in roll or not. Applicable when previewing, printing and exporting Edge bandings.


Enables you to hide given banding. Useful when banding is not used anymore. To show all (hidden and unhidden) bandings check option 2D_ShowHidden.


Color of band. To define or change it, click on particular color cell. Tab with following color picker will be shown.


To rearrange columns, their order and visibility, click the button XD_BtnRearrangeColumns in data grid or select the menu item "View > Rearrange columns".