In this option you can set Type, Precision and Unit for Length and Area formats of materials.
Type
Decimal |
e.g. 123,324 mm; 234,34 m; 142,2" |
Feet and decimal inches |
e.g. 833' 3,99" |
Fractional |
e.g. 324 31/32" |
Feet and fractional inches |
e.g. 1302' 63/64" |
Precision
Here you can set the precision of entering the length format (decimal places, fractions) according to setting of the type.
Unit
Here you can set the length/area unit of material (mm, cm, dm, m, '', '/m2,ft2). This option is accessible only when the decimal or fractional type is set. When other types are set, this option is disabled. Defined Unit is shown in the length and width of material in the program and also in printing reports.
|
Tip: You can also set your own length unit by writing it to combo box or you don't need to fill it in at all. In this case the length unit won't be shown. |
|
Note: Because for each length format internal storage of data is different, change of length type and precision doesn't convert already entered data. Therefore, it is necessary to consider this option carefully at the beginning of working with this program. |
Zero suppression
Leading |
Suppresses displaying of leading zeros in decimal numbers. |
Trailing |
Suppresses displaying of trailing zeros in decimal numbers. |
0 Feet |
Suppresses displaying of 0 feet. |
0 Inches |
Suppresses displaying of 0 inches. |